Dave, I am running an Internet Café in which I have about 10 workstations and one server. Now I am planning to configure a proxy server on LINUX for my cafe to improve performance in browsing. For this I have installed Complete REDHAT 9.0 in a machine equiped with 1.3G RAM, 80GB HDD, 1GHz MP, Intel P4, plus 2 NICs (Real Tech). But I have no idea about how to configure PROXY on it. Kindly let me know about any links or tutorial which can help me in a jumpstart. I do not want to mess with linux deeper. I just want to sonfigure PROXY and that is it.
Great to hear about your Internet Café! I’m unsurprised to hear that you’re finding it a bit tricky to configure a public Internet access facility to simultaneously offer good connectivity and security, however.
Since I’m not an expert at configuring proxy servers within the Linux world, I asked a couple of my colleagues at LinuxWorld Magazine for their suggestions, and here’s what they shared:
Steve Suehring suggested: that you start with Squid, a popular Linux proxy server. You can learn more about Squid at http://www.squid-cache.org/. Pay particular attention to the Squid Quick Start Guide, and if you really want to learn all the ins and outs, the book Squid: The Definitive Guide is apparently excellent.
Steve also notes that you can block banner ads automatically, a great service to your customers, by installing Adzapper. (of course, some folk would say that you’re doing your customers a disservice by blocking any Internet content, so you’ll have to make your own judgment call on this one).
Martin C. Brown also asked that I point you to his excellent article on Configuring Apache as a Proxy Server for ServerWorld. It’s well worth reading if you want to just sidestep Squid and the required configuration steps.
Either way, I think that should get you moving in the right direction. Good luck setting up your café and please do let me know if I can assist as you proceed further.
i am fresher for linux server,i have 25 users from linux i want to block some websites like monstar,sexy sites please hlp me
hi
my name is shekhar i am a network admin, so i need to configure proxy for particular 10 ip’s in 100 systems so please can u give the details abt squid server how to configure the squid server and how can i assign internet for particular 10 to 15 system trough linux proxy server
how to set time in squid server(Redhat enterprise server4.0)
sir
i am working system engineer in priveate college. i have how to config squid . pls help me sir. i am using redhat EL4. ple help config squid command thaning u sir
repected sir,
i wanna configure squid as proxy server for my network but I don’t now how to configure in linux please give me idea
Thanks
please send me squid server configuration on redhat linux5 or links in details
Hello sir,
I am sundar from chennai i am working in a big organisation. Here i want to config squid server in linux 5.0 but i no about this server so please tell me how to configue this server setp by step how to allow sites and restricted sites. What is requirement in my system… Please tell me.
i didn’t entered my proxy server. my server is linux
i am according to logging but forget linux command.
Actually i want to know command for go to white list.
Please advised me.
Thanks
Raymon
Hello My Dear Sir,
I am using openSUSE linux 11.0 and i want to run proxy server in there.How do i need to run for that.
Please let me share idea from your.I am a begineer for linux.So pls share me step by step running proxy server.
Thank you very much.
what is the procedure to intall proxy server.
internet comming im my linux server. i requied to access internet thorough my server.two nic required or not. what is config and ip address sceme access through my server.
hi all this is amit i m working as a network admin i hav 25 computer which is running internet for security perpus i want squid server as a proxy i hav redhat 5.0 ant 2 network card can u help me how i can configure that
Hello sir,
I am amit from chandigarh i am working in a big organisation. Here i want to config squid server in linux 4.0 but i no about this server so please tell me how to configue this server setp by step how to allow sites and restricted sites. Please tell me
sir i work in networking my linux proxy serwer is not to riplay & claint to not riplay to proxy serwer but proxy sewer net is all time comining
I am running an Internet Café in which I have about 45 workstations and one server. Now I am planning to configure a proxy server on LINUX for my cafe to improve performance in browsing. For this I have installed Complete REDHAT 9.0 in a machine equiped with 1 G RAM, 80GB HDD, 3 GHz MP, Intel P4, plus 2 NICs (Real Tech). But I have no idea about how to configure PROXY on it. Kindly let me know about any links or tutorial which can help me in a jumpstart. I do not want to mess with linux deeper. I just want to sonfigure PROXY and that is it.
i want to install fedora 9 server or red hat linux 9 serveron sunfire x2200 and x4200 amd server
how should i get driver easily from internet,how should i install linux os with firewall,proxy,email,antivirus free
i have purchased 2 sunfire x4200 and x2200 amd processor server
we are going for freelinux or red hat linux with squid proxy
pls guide for full installation and availability for linux drivers
so that installation will be carried successful
we are
Sir, how to configure a proxy server in Red hat 5.0 ?
dear sir
hai sir i am doing system admin a college so i need squid configure linux please help me
thanking sir
hi hlo sir please can you help me how to black the bad site.or how to attatch the linux on that pc.
i need information on SQUID server that how it works so kindly help me…
Dear Sir.
I ma Mr. Kamal kumar
this problem is Linex Server per web. sait Blockes ke liya muje cuche solesan tale me
thankings to you
Hello My Name Is Noman, I am running an Internet Cable in which I have about 100 workstations and one server. Now I am planning to configure a proxy server on LINUX for my Cable Network to improve performance in browsing. For this I have installed Complete fedora 6.1 in a machine equiped with 512G RAM, 40GB HDD, 2.6GHz Processor, Intel P4, plus 2 NICs (Real Tech). But I have no idea about how to configure PROXY on it. Kindly let me know about any links or tutorial which can help me in a jumpstart. I do not want to mess with linux deeper. I just want to configure PROXY and that is it.
hi all this is sunny i m working as a network admin i hav 25 computer which is running internet for security perpus i want squid server as a proxy i hav redhat 5.0 ant 2 network card can u help me how i can configure that
Dear Sir,
I am fresher in Linux line but I want to confi squid server. Plz send me squid.conf file with full details.
I am waiting a positive reply from your end
Hai everybody
I configured squid proxy server in my lan clients to access internet. Also i allowed limited websites in that(vi /etc/sites.allow). I have problem now which is some of sublinks not opened what to do help me
hi all this is sunny i m working as a network admin i hav 25 computer which is running internet for security perpus i want squid server as a proxy i hav redhat 5.0 ant 2 network card can u help me how i can configure that
thanks
Hi All,
I have 150 computers in my network and i wnat to allow only 10 people to use internet.
So iam using squid , please tell me what i need to edit in Squid.conf file to allow 10 members to use internet.
Thanks
hi… i m working with company as network administrator . now i like setup my network with linux server with internet. but i don’t have any idea about squid and all .. u guys please help me about please.
I am running squid as a proxy on a server outside the firewall to serve up web pages. The proxy and web server are running windows and the service on the web server is Apache. The problem is no matter what I do I can not get squid to serve up a web page. Im not getting any errors in the logs. I do get the error page from squid then I type the URL into the browser ( Im running squid in transparency mode so the user need no browser configuration )Any ideas?
dear sir,one problem in create squid server,when i done total configuration & start the service of squid but output display failed,i dont know wt is editing in vi /etc/squid/squid.conf & also editing in vi /etc/init.d/squid.also don`t know about activated lines in squid.conf.
Hello sir,
I am dheeraj from chandigarh i am working in a big organisation. Here i want to config squid server in linux 4.0 but i no about this server so please tell me how to configue this server anh how to allow sites and restricted sites. Please tell me
Hello,
All you need is to install CentOS, Fedora or any new version of Linux,
Linux comes with Squid, choose that when you install , mostly squid is auto selected.
After you have configured your Linux box, go to :
#
# cd /etc/squid/
# more squid.conf
squid usually configures itself on port 3128
before anything is process under squid it look at two files.
restricted-sites.squid and allowed-sites.squid,
these are the two files where whatever you put as .domain.com is allowed under allowed-sites.squid and restricted under restricted-sites.squid
after you are done adding the domains. for e.g
if you want to allow website http://www.google.com then
# vi allowed-sites.squid
.google.com
save the file and you are good.
after you are done adding the website use:
# squid start or look at the above command on this page.
I used Microsoft Active Directory to automatically deploy proxy server on IE or do it manually on IE and limit access control to change IE settings.
cheers
Hi sir
I am working as a system support team in my company we have windows client machines 200nos. and they are accessing internet but we want to ban unwanted sites
how can we configure the proxy and how can we apply the policies plz tell me step by step.
Thanks
Nandha
sir
i am working as technician in some institute. we have 400 computers on net and one server. on we have install linux verson 9.0. and other pcs are installed windows xp service pack 2 . i wants to block some chating sites and adults sites. please help me how we can block the sites using the proxy server.
Squid Server configuration
Squid uses the configuration file squid.conf. It is usually located in the /etc/squid directory. Access through the proxy can be given by individual IP addresses or by a subnet of IP addresses.
In squid.conf search for the default access control lists(acl) and add the following line below them:
acl mynetwork src 192.168.1.0/255.255.255.0 (for subnet)
acl mynetwork src 192.168.1.10/255.255.255.0 (for individual IP)
Then add the access control list named “mynetwork” to the http_access list with the following line:
http_access allow mynetwork
The default port for the proxy is 3128. Uncomment the following line and replace 3128 with the desired port :
http_port 3128
After configuration Restart this service
Assuming you have the runlevel scripts installed you can use the following commands as root:
Start squid /etc/rc.d/init.d/squid start
Restart squid /etc/rc.d/init.d/squid restart
Stop squid /etc/rc.d/init.d/squid stop
or issue the following TWO commands as root:
squid -z
squid
or configure squid to start at boot time using your runlevels.
troubleshooting: [do this on the proxy server]
‘tail -f /var/log/messages’ in a seperate bash window while restarting squid
‘tail -f /var/log/squid /access.log’ in a seperate bash window while
attempting connections to the proxy server. watch the output for
success & failure.
How configure squed in linux please now send me massege about linux squed
Ubuntu server 7.04 is release with easy squid proxy installation. Try it.
Yes dear y everyone is worry about squid and linux server.. it is the most easiest and reliable operating system in this world. if you want to configure a squid and otherthings in linux and you peoples are new to linux.. try this one ipcop.org first. it is easy and predefined server which is ready to work with in 15minutes.
if you peoples are having problem in this you can ask me anytime on my email.
dear sir
i am working as system admin and i want to configer firewall i want that wan user can access my network only port 8080 and other all port should be block but i dont hav idea so ple help me
sir i am working as technician in some institute. we have 40 computers on net and one server. on we have install linux verson 4.0. and other pcs are installed windows xp service pack 2 . i wants to block some chating sites and adults sites. please help me how we can block the sites using the proxy server.
I am using ubuntu 5.10
how i am configure my squid server in ubuntu 5.10 i installed squid but i am not configure this Please if any one help me
can we block some websites on redhat linux 9.0 without using squid proxy.
Mr. Dave! I am running an Internet Café in which I have about 10 workstations and one server (Squid – Installed).
Would you tell me how to block the adv. banner using squid!
And now, I tried to block the adv. ip addreses (prohibit bla.bla.bla.bla)!
But, the page is look not good!
Appears: “Hostname bla.bla.bla.bla cannot found”.
I’m going mad now!
Thx Before!
nothing
Bob, dare I say it: maybe you need to just live within the rules at school rather than keep trying to find ways to circumvent it?
ok i want to know how to use a proxy at school if it’s blocked… i used to use it all the time but the school caught on and now i want a way to be able to go to blocked sites without having to download anything or having to take hours just to get somewhere.. can you help me?
I am working with SCMLD.Pune. we have 110 desktop and three server. two is windows 2000 & one is Linux but i have to configure squid & sendmail on linux 9.0 ver. Please late me know How i am going to configure this two option.
Thank You.
Squid’s own squidguard can block ads, among other things (except ultraviolet rays). No need for a separate program.
I am working as a Network Administrator at the University of the Gambia.. We ahve a new server and I want to install Linux as a both internet and file server, and host our own website but i have no idea on linux… we have 64 PCs
We use Squid at work. As to the AdZapper thing, we incorporate the HOSTS file at:
http://www.mvps.org/winhelp2002/hosts.htm
as one filter set. Nice thing is a lot of those entries at MVPS are known spyware sites, which saves the IT folk later headaches if we block them to begin with.
The file gets updated regularly. But it doesn’t quite match Squid’s config files, so I did a simple script to convert it for Squid use.
We keep a whitelist that compares against the MVPS list. Those guys block some sites (certain Overture domains, for example) that our marketing department actually needs to visit. With the whitelist we can largely automate the benefits of the MVPS file without hampering legit usage.